OSRAM FX250 COMBI 12″ LED LIGHTBAR
€ 176.00 EUR excl. vat
NOVELTY!
For the first time, the world-famous Osram has made its own LED extra light ramp really sharp optics, of course its own diodes and a slim lamp housing at an affordable price with hard-to-beat light per crown.
Many LED ramps on the market are incorrectly referred to as Osram ramps as there are or are alleged to be Osram LEDs inside, but it is not Osram who is behind the product unlike this premium product.
Osram FX250 12 ″ LED ramp uses Osram’s very well-made optics based on LFR (LED Facing Reflector) technology. The advantage is that all light from the LED is thrown away in the long run and no stray light is formed near the car.
The lamp housing consists of an aluminum housing of high quality as well as powder coating and salt-resistant treatment.
The seal is made according to IP67 and pressure-ventilating membrane to prevent condensation and moisture.
Brutal pressure in the light!
The light image in this ramp is a combination of length and width developed for low mounting on passenger car, truck and truck with its focused light beam and a full 320m range at 1 lux or 640m range at 0.25 lux and really good width to the sides of a full 55m so is very hard to beat light per crown in Osram FX500.
Fits suitably in pairs and fits both 12V and 24V.
Data:
The lamp housing is made of powder-coated aluminum of the 6061 type.
Voltage: 12-24 volts.
Power consumption: 3 Amps at 12V and 1.5A at 24V
EMC / EMI approved and E-marked according to ECE R10
E-marked ECE R112 approved with reference number 27.5
Power consumption: 36W
Overvoltage and undervoltage protection, short-circuit protection.
Relay wiring: not included, most universal works.
Waterproof connector of larger DT model is mounted
Withstands severe stresses from weather and wind, vibration and shock resistant.
Lux @ 10m: 1296 lx
Light quantity: approx. 3600 theoretical lumens (2700 lumens measured)
Brightness: 129600 cd
Range: 360m @ 1 lux, 720m @ 0.25 lux
Length without brackets: 309mm
Enclosure class: IP67 + pressure-ventilating membrane
Length with inward-facing brackets & amp screw: 339 mm
Length with outward-facing brackets 656mm
C-C holes inward-facing brackets: 262mm
C-C holes outward-facing brackets: 365mm
Height with standing brackets: 77 mm
Height without brackets: 54mm
Depth: 93.5 mm
Number of LEDs: 10
Lifespan: Up to 50,000 hours
Working range: -40 ° c to + 63 ° c
Lens: Stone shot resistant polycarbonate
Warranty: 5 years
4 in stock
Description
NOVELTY!
For the first time, the world-famous Osram has made its own LED extra light ramp really sharp optics, of course its own diodes and a slim lamp housing at an affordable price with hard-to-beat light per crown.
Many LED ramps on the market are incorrectly referred to as Osram ramps as there are or are alleged to be Osram LEDs inside, but it is not Osram who is behind the product unlike this premium product.
Osram FX250 12 ″ LED ramp uses Osram’s very well-made optics based on LFR (LED Facing Reflector) technology. The advantage is that all light from the LED is thrown away in the long run and no stray light is formed near the car.
The lamp housing consists of an aluminum housing of high quality as well as powder coating and salt-resistant treatment.
The seal is made according to IP67 and pressure-ventilating membrane to prevent condensation and moisture.
Brutal pressure in the light!
The light image in this ramp is a combination of length and width developed for low mounting on passenger car, truck and truck with its focused light beam and a full 320m range at 1 lux or 640m range at 0.25 lux and really good width to the sides of a full 55m so is very hard to beat light per crown in Osram FX500.
Fits suitably in pairs and fits both 12V and 24V.
Data:
The lamp housing is made of powder-coated aluminum of the 6061 type.
Voltage: 12-24 volts.
Power consumption: 3 Amps at 12V and 1.5A at 24V
EMC / EMI approved and E-marked according to ECE R10
E-marked ECE R112 approved with reference number 27.5
Power consumption: 36W
Overvoltage and undervoltage protection, short-circuit protection.
Relay wiring: not included, most universal works.
Waterproof connector of larger DT model is mounted
Withstands severe stresses from weather and wind, vibration and shock resistant.
Lux @ 10m: 1296 lx
Light quantity: approx. 3600 theoretical lumens (2700 lumens measured)
Brightness: 129600 cd
Range: 360m @ 1 lux, 720m @ 0.25 lux
Length without brackets: 309mm
Enclosure class: IP67 + pressure-ventilating membrane
Length with inward-facing brackets & amp screw: 339 mm
Length with outward-facing brackets 656mm
C-C holes inward-facing brackets: 262mm
C-C holes outward-facing brackets: 365mm
Height with standing brackets: 77 mm
Height without brackets: 54mm
Depth: 93.5 mm
Number of LEDs: 10
Lifespan: Up to 50,000 hours
Working range: -40 ° c to + 63 ° c
Lens: Stone shot resistant polycarbonate
Warranty: 5 years
Additional information
| Weight | 0.5 kg |
|---|
Reviews
There are no reviews yet.