Brown & Watson International
Vision X Lighting

Vision X Lighting

Denali Electronics

Motorcycle electronics

Twisted Throttle

Motorcycle accessories

Projecta

Power management

Ultima

Automotive accessories

Big Red Gear

Outback offroad lighting

BEST GRIP SCREW STUDS 3.6MM

 127.15 EUR excl. vat

Best Grip screw stud has a completely new design and is not designed as a conventional screw. A screw is the last thing you want to get in the tire as it provides puncture might not immediately but after a while when the tire is worn down. Best grip is flat on the bottom and falls not down more and more in the tire under load.

The design on the bottom is so cleverly designed so that the stud cannot even bolted through the cord during assembly. The big thread will keep the stud several times more than a standard “screw” thread which minimizes the risk of losing the stud after a period of use. With the great thread that holds the stud significantly better do not spike screwed as deep into the tire and can be installed in the tire with lower heels.

Best grip screw stud can be installed in pre-drilled holes, or directly to the deck without predrilled holes. Best Grips carbide tip high quality ensures a long lifespan and is used in everything from light motorcycles up to heavy construction equipment. The stud can easily be screwed out of the tires if you want to remove them. After removing, the mark is barely visible on the tire.

The stud can also be glued on really extreme usage. However in 99 % of cases that is not necessary. The glue is recommended Loctite 496 or 480. The stud is easily mounted with the included sleeve mounted in a standard cordless drill.

Data:
100 studs in a package
1 tool for installation is included
Protrusion 3.6mm
Measurements diam. 7.7mm length. 16.6mm
Depth of tire 13.0mm
Minimum tread depth 10.5mm
Minimum tread depth tracks 13.0mm
Diameter carbide tip 2.6mm

Application:
The stud can be mounted on most types of vehicles but are recommended on a snowmobile, scooter, ATV tracks, track carpets, or tires with narrow heels for example on MC etc.

10 in stock (can be backordered)

SKU: 1600.200.1 Categories: ,

Description

Best Grip screw stud has a completely new design and is not designed as a conventional screw. A screw is the last thing you want to get in the tire as it provides puncture might not immediately but after a while when the tire is worn down. Best grip is flat on the bottom and falls not down more and more in the tire under load.

The design on the bottom is so cleverly designed so that the stud cannot even bolted through the cord during assembly. The big thread will keep the stud several times more than a standard “screw” thread which minimizes the risk of losing the stud after a period of use. With the great thread that holds the stud significantly better do not spike screwed as deep into the tire and can be installed in the tire with lower heels.

Best grip screw stud can be installed in pre-drilled holes, or directly to the deck without predrilled holes. Best Grips carbide tip high quality ensures a long lifespan and is used in everything from light motorcycles up to heavy construction equipment. The stud can easily be screwed out of the tires if you want to remove them. After removing, the mark is barely visible on the tire.

The stud can also be glued on really extreme usage. However in 99 % of cases that is not necessary. The glue is recommended Loctite 496 or 480. The stud is easily mounted with the included sleeve mounted in a standard cordless drill.

Data:
100 studs in a package
1 tool for installation is included
Protrusion 3.6mm
Measurements diam. 7.7mm length. 16.6mm
Depth of tire 13.0mm
Minimum tread depth 10.5mm
Minimum tread depth tracks 13.0mm
Diameter carbide tip 2.6mm

Application:
The stud can be mounted on most types of vehicles but are recommended on a snowmobile, scooter, ATV tracks, track carpets, or tires with narrow heels for example on MC etc.

Additional information

Weight 0.5 kg

Reviews

There are no reviews yet.

Be the first to review “BEST GRIP SCREW STUDS 3.6MM”