BEST GRIP SCREW STUDS 7.3MM
€ 127.15 EUR excl. vat
Best Grip screw stud has a completely new design and is not designed as a conventional screw. A screw is the last thing you want to get in the tire as it provides puncture might not immediately but after a while when the tire is worn down. Best grip is flat on the bottom and falls not down more and more in the tire under load.
The design on the bottom is so cleverly designed so that the stud cannot even bolted through the cord during assembly. The big thread will keep the stud several times more than a standard “screw” thread which minimizes the risk of losing the stud after a period of use. With the great thread that holds the stud significantly better do not spike screwed as deep into the tire and can be installed in the tire with lower heels.
Best Grip screw stud can be installed in pre-drilled holes, or directly to the deck without predrilled holes. Best Grips carbide tip high quality ensures a long lifespan and is used in everything from light motorcycles up to heavy construction equipment. The stud can easily be screwed out of the tires if you want to remove them. After removing, the mark is barely visible on the tire.
The stud can also be glued on really extreme usage. However in 99 % of cases that is not necessary. The glue is recommended Loctite 496 or 480. The stud is easily mounted with the included sleeve mounted in a standard cordless drill.
Data:
100 studs in a package
1 tool for installation is included
Protrusion 7.3mm
Measurements diam. 9.0mm length. 20.8mm
Depth of tire 13.5mm
Minimum tread depth 11.0mm
Diameter carbide tip 2.2mm
Application:
The stud can be mounted on most types of vehicles, but are recommended for Enduro front tire.
22 in stock (can be backordered)
Description
Best Grip screw stud has a completely new design and is not designed as a conventional screw. A screw is the last thing you want to get in the tire as it provides puncture might not immediately but after a while when the tire is worn down. Best grip is flat on the bottom and falls not down more and more in the tire under load.
The design on the bottom is so cleverly designed so that the stud cannot even bolted through the cord during assembly. The big thread will keep the stud several times more than a standard “screw” thread which minimizes the risk of losing the stud after a period of use. With the great thread that holds the stud significantly better do not spike screwed as deep into the tire and can be installed in the tire with lower heels.
Best Grip screw stud can be installed in pre-drilled holes, or directly to the deck without predrilled holes. Best Grips carbide tip high quality ensures a long lifespan and is used in everything from light motorcycles up to heavy construction equipment. The stud can easily be screwed out of the tires if you want to remove them. After removing, the mark is barely visible on the tire.
The stud can also be glued on really extreme usage. However in 99 % of cases that is not necessary. The glue is recommended Loctite 496 or 480. The stud is easily mounted with the included sleeve mounted in a standard cordless drill.
Data:
100 studs in a package
1 tool for installation is included
Protrusion 7.3mm
Measurements diam. 9.0mm length. 20.8mm
Depth of tire 13.5mm
Minimum tread depth 11.0mm
Diameter carbide tip 2.2mm
Application:
The stud can be mounted on most types of vehicles, but are recommended for Enduro front tire.
Additional information
| Weight | 0.5 kg |
|---|
Reviews
There are no reviews yet.